一、特點:

1.從放料到收料超短距離。

2.陶瓷棍配刮刀，印刷潤實，色澤清晰。

3.反復印刷周長190.5-635MM，填補層疊式柔版印刷機,斜背商標印刷機，花瓣式印刷機等印刷長度不夠的空白。

4.采用齒輪套色，解決360度套色裝置間隙大、裝配不良、磨損等，影響套色精準度、印刷不穩定的諸多弊端。

5.從左至右：卷料供紙、印刷、自動紅外烘干（選配UV紫外線固化，LDE固化）、（選配：膜切、覆膜、噴碼、分條）收卷一次連貫完成。

6.水性墨（UV墨）印刷、無污染、環保、印刷速度根據網線不同，速度也有所不同，目前印刷標簽最快的速度是90米每分鐘。

7.印刷票據、標簽、卡紙、高檔不干膠商標，服裝吊牌等。

8.承印材料：紙張20~250g/㎡不干膠軟性卷材等材料。

9.工藝：

1放料、2自動恒張力、3刮刀、4印刷單元、5牽引、6自動恒張力、7中心收料

feature:

1. From the discharge to the receipt of the short distance.

2. The ceramic stick is equipped with a scraper, which is printed and moist, and has a clear color.

3. Repeatedly printing the circumference of 190.5-635MM, filling the blank of the cascading flexographic printing machine, the slanting trademark printing machine, the petal printing machine and the printing length.

4. The use of gear color to solve the 360-degree coloring device gap, assembly, wear, etc., affecting the color accuracy and printing instability.

5. From left to right: coil feeding, printing, automatic infrared drying (optional UV curing, LDE curing), (optional: film cutting, laminating, coding, slitting) winding a coherent completion .

6. Water-based ink (UV ink) printing, pollution-free, environmentally friendly, printing speed varies according to the network cable, the speed is also different, the fastest speed of printing labels is 90 meters per minute.

7. Printing bills, labels, cardboard, high-grade stickers, clothing tags, etc.

8. Printing materials: paper 20~250g/m2 self-adhesive soft coil and other materials.

9. Process:

1 discharging, 2 automatic constant tension, 3 scraper, 4 printing unit, 5 traction, 6 automatic constant tension, 7 center receiving

二.  技術參數Technical parameters

三、機器配置The machine configuration：

1.   放卷裝置Unwinding device：

1)    單臂式 中心卷起

Single arm center roll up 

2)   放卷最大直徑

Maximum diameter of unwinding：     Φ500 mm

3)   氣脹軸規格

Inflatable shaft specification：      3”

4)   氣脹軸數量

Number of inflation shafts：          1

5)   張力控制范圍

Tension control range：          0-50kg/全幅寬

6)   磁粉

Tension control range：        5KG，自動張力控制

7)  模擬糾偏系統

Analog Correction System        1 set     

2.   印刷單元Printing unit

1)   驅動方式：減速電機驅動，同步帶傳動。

  Drive mode: geared motor drive, synchronous belt drive.

2)   印刷版棍軸Printing plate shaft：

（1）縱向套色：手動 Vertical color: manual

（2）橫向套色：手動 Horizontal color: manual

3)   整體構成：版輥、刮刀、墨盤、網紋輥。

  Overall composition: plate roll, scraper, ink tray, anilox roller.

4）刮刀：采用單向刮刀，刮刀的材料選用高強度鋁合金型材，裝卸、清洗方便，快捷。

      Scraper: It adopts one-way scraper. The material of the scraper is made of high-strength aluminum alloy profile, which is convenient and quick to load, unload and clean.

4． 干燥裝置Drying device：

   1) 每色組配強風+紅外線烘箱干燥（選配：UV紫外線固化，LED固化）

      Each color group is equipped with strong wind + infrared oven drying (optional: UV curing, LED curing)

  2) 烘箱電熱和風機智能控制，烘箱內溫度可控。

  The oven electric heating and fan intelligent control, the temperature inside the oven can be controlled.

5．  收卷裝置Winding device

1)   收卷方式：     單臂式中心卷曲

Winding method: One-arm center curl

2)   紙芯安裝方式：  氣脹軸脹緊     1條

Paper core installation method: Expansion shaft expansion 1

3) 氣脹軸規格:        3”

Inflatable shaft specification: 3”

4) 張力控制：       全自動張力控制

Tension control: Fully automatic tension control

5)  收卷張力范圍：    1-5KG/全幅寬

Winding tension range: 1-5KG/full width

6)  單收卷直徑：     最大Φ500mm。

Single winding diameter: MaximumΦ500mm.

四、配套設施（用戶自行負責）

 supporting facilities (users are responsible for their own)

1、電源：3相*380V*50HZ、三相西線制

Power supply: 3-phase *380V*50HZ, three-phase west line system

2、空壓機：1KW（1臺）

air compressor: 1KW (1 set)

五、電器清單electrical list

六、報價The price

以上技術參數及圖片僅供參考，具體以實物為準