二、Parameter configuration:

1. Printing color number: monochrome;

2. Maximum mechanical speed: 80m / min;

3. Maximum printing speed: 60m / min;

4. Anilox roller: metal anilox rod (the number of lines selected by the customer is within 300 lines);

5. Registration accuracy: none;

6. Transverse: left and right adjustment ± 5mm (manual);

7. Rewinding and unwinding: optional

8. Retracting and unwinding paper drum / rubber drum: none;

9. Embossing force: mechanical adjustment;

10. Embossing roller: φ 131.3mm；

11. Drying method: electric heating;

12. Drying power: 6kW;

13. Fan Oven: 45w12;

14. Main motor: 1.5kw reduction motor;

15. Main frequency converter: domestic frequency converter;

16. Inking motor: synchronous motor for inking;

17. Ordinary bearing: domestic;

18. One way bearing: domestic;

19. Aluminum alloy guide wheel is subject to hard oxidation, dynamic balance and static balance treatment;

20. Deviation correction system: none;

21. Tension control system: none;

22. Landing plate: pneumatic landing plate;

23. Main electrical appliances: Chint or Delixi;

24. Overall power (about) 9kw;

25. Print length range: 250mm-1000mm;

26. Plate thickness: 2.28 or 1.7mm (optional);

27. Maximum print width: 1700mm;

28. Maximum printing width: 1660mm;

29. Printing stick: one printing stick with a length of 300-400mm;

30. Printing materials: plastic, web paper and non-woven fabric;

31. Overall dimension (about): 2.2 long × Width 2.7 × 2.5m high;

32. Weight (about): 2 tons.

三、Description of main features:

1. Simple operation, convenient operation, accurate color registration and long service life;

2. Adopt motor, variable frequency speed regulation, save power and small operation fluctuation;

3. The inking motor stops automatically when the plate falls, and the inking device starts automatically when the plate starts;

4. The ink supply mode is rubber roller scraping;

5. Special module spur gear transmission is adopted, and the printing size is accurate;

6. It is equipped with a blowing heating device, in which the heating is controlled by a central constant temperature control system;

7. The low bar is processed with steel, treated with special process and plated with hard chromium protective layer;

8. Aluminum alloy guide wheel shall be subject to hard oxidation, dynamic balance and static balance treatment;

9. It is equipped with cold air setting bellows, which can effectively prevent ink adhesion and other defects after pri

10. Clear printing image, accurate folding and high yield;

11. Automatic counter, automatic stop when material is cut off, automatic ink transport when stopping, and automatic stop of ink transport motor during printing.